| 7Semi ADS7830 | Arduino library for the ADS7830 8-bit 8-channel I2C ADC. |
| 7Semi ADXL335 Accelerometer | Arduino library for the ADXL335 analog 3-axis accelerometer module. |
| 7Semi BME280 | Arduino wrapper library for Bosch BME280 sensor (I2C + SPI). |
| 7Semi BME690 | Arduino library for the 7Semi BME690 sensor module (gas, pressure, temperature, humidity). |
| 7Semi BMI270 | Arduino library for the Bosch BMI270 IMU (7Semi wrapper) |
| 7Semi BMI323 | Lightweight and efficient BMI323 IMU sensor library. |
| 7Semi BMP384 | Lightweight and efficient BMP384 pressure and temperature sensor library. |
| 7Semi BMP58x | Lightweight BMP58x driver for Arduino (I2C/SPI) with beginner-friendly defaults. |
| 7Semi BMV080 | Arduino library for accurate particulate matter sensing using Bosch Sensortec BMV080 |
| 7Semi BNO08x | Minimal BNO08x IMU SHTP driver with pluggable I2C/SPI/UART transports. |
| 7Semi DAC7578 | Arduino driver for Texas Instruments DAC7578 8-channel 12-bit I2C DAC. |
| 7Semi ENS210 | ENS210 temperature and humidity sensor library for Arduino. |
| 7Semi HMC6343 Compass | Arduino library for the HMC6343 3-axis digital compass sensor with tilt compensation. |
| 7Semi ICM20948 | Arduino library for the 7Semi ICM-20948 9-axis IMU (Accel, Gyro, Mag, Temp). |
| 7Semi INA260 | Arduino library for the INA260 current, power, and bus voltage monitor over I2C. |
| 7Semi LIS3DH | Arduino library for LIS3DH 3-axis accelerometer with I2C and SPI support. |
| 7Semi MAX31855 | MAX31855 thermocouple interface library for Arduino and ESP32. |
| 7Semi MLX90393 | MLX90393 3-axis magnetometer library |
| 7Semi-OPT3004-Digital-Ambient-Light-Sensor-Arduino-Library | Arduino library for the OPT3004 ambient light sensor with lux output. |
| 7Semi-RS485-Temperature-Humidity-Probe-Arduino-Library | Simple Modbus RTU reader for 7Semi RS485 temperature/humidity probe. |
| 7Semi SHT4x | Arduino library for the 7Semi SHT4x (SHT40/SHT41/SHT45) temperature and humidity sensor. |
| 7Semi STS3x | Arduino library for the Sensirion STS3x digital temperature sensor. |
| 7Semi STS4x | Arduino library for Sensirion STS4x digital temperature sensors over I2C. |
| 7Semi-TMP102 | Arduino library for the TMP102 digital temperature sensor. |
| 7Semi TMP11x | Arduino library for Texas Instruments TMP116/TMP117 high-accuracy temperature sensors. |
| 7Semi TMP23x | Arduino library for Texas Instruments TMP23x analog temperature sensors. |
| 7Semi VEML7700 | Arduino library for the VEML7700 ambient light sensor. |
| 7Semi_AD569x | Arduino library for Analog Devices AD569x 16-bit DAC with I2C interface. |
| 7Semi_AD849x | Arduino library for Analog Devices AD849x thermocouple amplifier modules. |
| 7Semi_ADS126x | Arduino library for the Texas Instruments 7semi_ADS126x 32-bit ADC. |
| 7Semi_ADS1xx5 | Arduino library for Texas Instruments ADS1015 and ADS1115 16-bit ADC with I2C interface. |
| 7Semi_BME68x | Arduino library for Bosch BME68x environmental sensor with I2C and SPI support. |
| 7Semi_BMI330 | Lightweight BMI330 IMU driver for Arduino (I2C/SPI) with beginner-friendly defaults. |
| 7Semi_BMP585 | Lightweight BMP585 driver for Arduino (I2C/SPI) with beginner-friendly defaults. |
| 7Semi_BNO055 | Lightweight BNO055 driver (raw + minimal helpers) with optional configurable I2C pins. |
| 7Semi_CO2TH | I2C driver for the 7Semi CO₂TH sensor with RHT compensation. |
| 7Semi_DS18B20 | Full-feature DS18B20 temperature sensor library using OneWire. |
| 7Semi_HX711 | Lightweight HX711 ADC library using manual bit-banging. |
| 7Semi_INA219 | 7Semi INA219 Precision Current and Power Monitor Driver. |
| 7Semi_ISM330DHCX | Arduino library for the STMicroelectronics ISM330DHCX 6-axis IMU (accelerometer + gyroscope) over I2C. |
| 7Semi_LPS28DFW | Arduino library for the LPS28DFW pressure sensor. |
| 7Semi_MAX17048 | Arduino library for the MAX17048 fuel gauge IC. |
| 7Semi_MAX31856 | Arduino library for MAX31856 thermocouple amplifier. |
| 7Semi_MAX31865 | Driver for the MAX31865 RTD-to-digital converter. |
| 7Semi_MCP23017 | Lightweight driver for the MCP23017 16-bit I²C GPIO expander. |
| 7Semi_MMC5983MA | Arduino library for the MMC5983MA 3-axis magnetometer with I2C support, temperature readout, and heading helpers. |
| 7Semi_NAU7802_24bit_ADC_WeightScale | Arduino library for NAU7802 24-bit ADC-based load cell and weigh scale modules. |
| 7Semi_OPT4048 | Lightweight OPT4048 color sensor driver for Arduino (I2C) with RGB + lux helpers. |
| 7Semi_SGP4x | Arduino library for SGP40 and SGP41 gas sensors. |
| 7Semi_SHT4x_analog_Arduino-Library | Simple analog library for Sensirion SHT4x-Analog humidity and temperature sensors. |
| 7Semi_TMAG5273 | Arduino driver for Texas Instruments TMAG5273 3-axis Hall-effect magnetic sensor. |
| 7semi_L89HA | Parse and extract GNSS data (GNRMC, GNGGA) from L89 GPS modules. |
| 7semi_SCD4x_CO2_Sensor | Arduino library for SCD40/SCD41 CO₂ sensors with I2C interface. |
| ACS772_CurrentSensor | Simple Arduino library to read current from ACS772 Hall-effect current sensor. |