Open Embedded Probe (OEP): turn an ESP32 / RP2040 / RP2350 board into a debug probe, target console and test fixture that hosts drive through one open protocol.
Debug wires (RVSWD / SWIO for WCH CH32, SWD), a target console, GPIO / UART fixtures and logic capture, declared by name, under a session lock, over USB vendor bulk, HID, CDC, USB-Serial/JTAG or a UART bridge. The protocol is fixed; capabilities are declared by the probe and anyone can add their own interfaces. Specification: https://github.com/Open-Embedded-Probe/oep-spec
| Filename | Release Date | File Size |
|---|---|---|
| OpenEmbeddedProbe-0.0.54.zip | 2026-11-11 | 1.08 MiB |
| OpenEmbeddedProbe-0.0.53.zip | 2026-11-09 | 1.05 MiB |
| OpenEmbeddedProbe-0.0.52.zip | 2026-11-07 | 1.05 MiB |
| OpenEmbeddedProbe-0.0.51.zip | 2026-11-06 | 1019.52 KiB |
| OpenEmbeddedProbe-0.0.50.zip | 2026-11-05 | 1012.65 KiB |
| OpenEmbeddedProbe-0.0.49.zip | 2026-11-05 | 1011.93 KiB |
| OpenEmbeddedProbe-0.0.48.zip | 2026-11-05 | 1010.76 KiB |
| OpenEmbeddedProbe-0.0.47.zip | 2026-11-05 | 1010.76 KiB |
| OpenEmbeddedProbe-0.0.46.zip | 2026-11-05 | 1008.98 KiB |
| OpenEmbeddedProbe-0.0.45.zip | 2026-11-05 | 1009.03 KiB |